Nancy Wei

Introduction: The Nissan Rogue bolt pattern is 5×114.3 for the generations covered. PCD on its own does not determine wheel fitment. The diameter and width of the wheel, its offset, and center bore are important, as well as the tire size and clearance for the brakes. This guide has Rogue

Introduction Wheels and brakes must be evaluated as a fitment system. Just because the size matches the PCD does not mean brake clearance won’t be an issue. Whether there’s sufficient brake caliper clearance for safe installation hinges on the inner barrel geometry, spoke geometry, vehicle mounting position, and actual brake

Three generations of A3, one bolt circle. Here’s the Audi A3 bolt pattern, center bore, and torque spec you need before quoting a wheel — plus where the 8P, 8V, and 8Y actually differ. Understanding The Audi A3 Bolt Pattern 5 x 112 mm or 5 x 4.41 in is

The VW Golf bolt pattern changed three times across the model’s long production history. Early Golf generations use 4×100, Mk4 uses 5×100, and Mk5 through Mk8 use 5×112. That change affects sourcing, catalog mapping, and quote accuracy. Start with the exact model year, market, and trim, then build a wheel

Should you deal with wheels for classic roadsters, an error in the Mazda Miata bolt pattern will lead to expensive returns. In this instructional piece, we provide you with the exact measurements for bolt patterns, center bore, and torque specifications for the NA and NB models. You will also learn

One Bolt Pattern Across the US Jeep Patriot Run The US-market Jeep Patriot uses a 5×114.3 bolt pattern from 2007 through 2017. The PCD stays consistent from the original MK model through the facelift, while the recorded 17×6.5 offset changes from ET39 to ET40. Start with the model year, engine,

Mercedes C300 Bolt Pattern: The Short Answer The Mercedes C300 bolt pattern measures 5×112 across the W204, W205, and W206 generations in the United States from 2008 through 2026. That consistent PCD makes the first filter simple, yet wheel size and offset ranges change by chassis. This guide organizes verified

Ford Taurus Bolt Pattern: The Short Answer The Ford Taurus bolt pattern changed during its US production run, moving from 5×108 on 1986-2007 models to 5×114.3 on 2008-2019 models. That change makes the model year essential when selecting Ford Taurus wheels. This guide compares the factory wheel ranges across each