Ford Taurus Bolt Pattern: The Short Answer
The Ford Taurus bolt pattern changed during its US production run, moving from 5×108 on 1986-2007 models to 5×114.3 on 2008-2019 models. That change makes the model year essential when selecting Ford Taurus wheels. This guide compares the factory wheel ranges across each generation and explains how distributors can separate inventory, choose suitable designs, and reduce fitment returns.
| US model years | Bolt pattern | Imperial | Center bore |
|---|---|---|---|
| 1986-2007 | 5×108 | 5×4.25 | 63.4 mm |
| 2008-2019 | 5×114.3 | 5×4.5 | 63.4 mm |
Ford Taurus Wheel Fitment Specs by Generation
Use the table to compare each US-market Taurus generation. Every row identifies the mounting family, factory wheel range, hub measurement, and body style for that production period.
| Model / Year | SIZE | PCD | ET | CB | Typical vehicles |
|---|---|---|---|---|---|
| Taurus I 1986-1991 US | 14×5.5 15×6 | 5×108 | ET42 | 63.4 mm | Sedan / wagon |
| Taurus II 1992-1995 US | 14×5.5 15×6 | 5×108 | ET42 | 63.4 mm | Sedan / wagon |
| Taurus III 1996-1999 US | 15×6 16×6.5 | 5×108 | ET42 ET46 | 63.4 mm | Sedan / wagon |
| Taurus IV 2000-2007 US | 16×6 | 5×108 | ET42 | 63.4 mm | Sedan / wagon |
| Taurus V 2008-2009 US | 17×7 18×7.5 | 5×114.3 | ET52 | 63.4 mm | Sedan |
| Taurus VI 2010-2012 US | 17×7.5 18×7.5 19×8 | 5×114.3 | ET39-44 | 63.4 mm | Sedan |
| Taurus VI facelift 2013-2019 US | 17×7.5 18×8 19×8.5 20×8 | 5×114.3 | ET39 | 63.4 mm | Sedan; brake packages |
1986-2007 Ford Taurus: 5×108 Bolt Pattern
First- through fourth-generation US Taurus models use a 5×108 PCD and 63.4 mm center bore. The table covers factory wheel diameters from 14 to 16 inches across this group. Generation and trim determine the exact combination.
2008-2009 Ford Taurus: The Change to 5×114.3
The fifth-generation US Taurus changed to 5×114.3. It uses 17×7 and 18×7.5 wheels near ET52 with a 63.4 mm center bore. Keep this wheel family separate from 2007 stock because the two mounting patterns do not interchange.
After you identify the applicable factory range, compare 17 inch alloy wheels and 18 inch alloy wheels by size and design.
2010-2012 Ford Taurus: Lower Offset, Larger Wheel Range
The sixth-generation Taurus keeps the 5×114.3 pattern. Its factory range includes 17×7.5 and 18×7.5 wheels near ET39, plus 19×8 wheels near ET44.
2013-2019 Ford Taurus: Expanded Factory Wheel Range
The facelifted US Taurus uses 5×114.3 with a 63.4 mm center bore. Its factory range includes 17×7.5 ET39, 18×8 ET39, 19×8.5 ET39, and 20×8 ET39 combinations.
Later US applications also include 19 inch alloy wheels and 20 inch alloy wheels. The larger diameter creates a shorter tire sidewall and changes ride character, which makes the intended driving use important.
How to Read a Ford Taurus Bolt Pattern
Catalogs use the terms Ford Taurus lug pattern and Ford Taurus wheel bolt pattern for the same mounting measurement. When you see 5×114.3, five mounting holes sit on a 114.3 mm pitch-circle diameter. Wheel catalogs also call this pattern 5×4.5 inches, while they call 5×108 a 5×4.25 pattern. These notations describe the lug circle only.
Use this 5×114.3 wheels guide to review PCD measurement and compatibility logic before comparing wheel designs.
The Seven Checks That Decide Real Fitment
The seven checks below determine whether a wheel fits the vehicle requirements. Use the same sequence to screen customer information, prepare a cleaner RFQ, and reduce avoidable sampling and ordering mistakes.
- Model year, production date, market, and generation: especially important for the 2007/2008 change.
- PCD: 5×108 and 5×114.3 have different pitch circles. Never force one pattern onto the other. Never treat them as interchangeable.
- Center bore: match the wheel bore to the 63.4 mm hub reference. When necessary, specify an engineered centering solution that suits the application.
- Offset and width: evaluate inner strut clearance, outer fender position, steering geometry, and tire sidewall location together.
- Brake clearance: start with a wheel drawing. Add a brake template check when the drawing leaves any clearance question. Rim diameter alone cannot prove clearance.
- Fasteners: match thread specification, seat profile, shank length, and safe thread engagement to the wheel and vehicle.
- Load and tire space: check wheel load rating, tire load index, rolling diameter, suspension travel, and full-lock clearance.
Choosing the Right Ford Taurus Wheel Size
Daily Replacement and Fleet Use
If you manage daily-replacement and fleet inventory, staying within the factory wheel range simplifies tire sourcing and replacement planning. Confirm the Ford Taurus tire size at trim level because one generation can include several packages. Keep the early and later Taurus size families separate during stock allocation.
Sport Appearance and Performance Builds
When you compare Ford Taurus rims for a sport build, a larger diameter produces a shorter tire sidewall and a more immediate steering feel. It also reduces ride cushioning on rough roads, so select the diameter by driving priority instead of appearance alone.
After completing the vehicle checks, review wheels for Ford to compare available design and construction categories.
Choosing Among Cast, Flow-Formed, and Forged Wheels
Choose the construction method after the use case is clear. Cast wheels are practical for replacement and broad wholesale coverage. Flow-formed wheels suit performance-oriented ranges. Projects that need custom dimensions and finishes can use forged monoblock wheels.
Example Wheel Selection Scenarios for Ford Taurus
Factory data and vehicle use should determine wheel size, not the largest diameter in stock. The two examples below show how generation data guides a practical shortlist.
1986-2007 Daily Replacement Inventory
The 1986-2007 group uses 5×108. A cast replacement program suits daily use and broad stock planning when it stays close to the year-specific dimensions. Review KIPARDO cast alloy wheels by construction, then select the final SKU within the factory range for the exact generation.
2008-2019 Replacement and Fleet Stock
Keep the 5×114.3 family separate from early Taurus stock. For 2013-2019 applications, the KIPARDO 61980 cast wheel lists a 20×8.5 size, ET40, 5×114.3 PCD, CB 63.4-67.1 mm range, and Taurus application. The 63.4 mm bore option matches the Taurus hub specification for this example.
Common Ford Taurus Fitment Mistakes
Most Ford Taurus wheel fitment mistakes start when a buyer treats the model name and five-lug layout as complete compatibility. The sections below show the errors that create the most frequent installation problems.
Confusing 2007 and 2008 Bolt Patterns
The 2007 US-market Taurus uses 5×108, while the 2008 model uses 5×114.3. The five-lug layout can look similar at a glance, but the mounting circles do not interchange. A distributor who carries the earlier specification into a 2008 quotation will select the wrong wheel family. Confirm the model year, sales market, generation, and VIN before assigning a SKU.
Matching PCD but Ignoring Wheel Position
Correct PCD does not control wheel position. Too little positive offset pushes the assembly outward and may create fender contact during steering travel. Too much positive offset moves it inward and can approach the strut. Evaluate ET with rim width, then compare the proposed position against the factory envelope.
Ignoring Center Bore and Fastener Details
The 63.4 mm Taurus hub reference does not make every wheel with the same bore suitable. A larger universal bore needs an engineered centering solution that matches the application. Match thread specification, seat profile, shank length, and usable engagement as a separate step. Early and later Taurus groups use different fastener systems, so match the hardware to the exact model year.
Skipping SHO Brake-Clearance Checks
Treat Taurus SHO and Police Interceptor Sedan applications as separate brake-clearance checks. Confirm the exact brake package with Ford service data, then compare its template with the wheel drawing before allocating the SKU.
Inventory Advice for Wheel Distributors
When you structure Taurus inventory, separate the 5×108 1986-2007 US family from the 5×114.3 2008-2019 US family. Maintain a generation-level record for every SKU, then require the VIN, model year, trim, and current wheel label with each quotation request. This structure prevents staff from allocating one Taurus wheel family to the other.
Sources and Verification
- Wheel-Size.com – Ford Taurus generation and model-year fitment data
- TireWheelGuide – Ford Taurus year-specific wheel and tire data
- The Driver Adviser – Ford Taurus bolt-pattern overview
This guide cross-checks database values at the US generation and model-year level. The vehicle VIN, Ford service data, and the wheel manufacturer’s application record control final installation approval.
Final Thoughts
The Ford Taurus divides into two clear US-market wheel families: 5×108 for 1986-2007 and 5×114.3 for 2008-2019. Keeping those groups separate improves quotations, inventory control, and replacement accuracy. At KIPARDO, we help wheel businesses compare practical options for the exact Taurus generation and target market. Share the model year, market, trim, target size, brake package, and load requirement with our team for a fitment review.
Frequently Asked Questions
What Is the Ford Taurus Bolt Pattern?
The US-market Ford Taurus uses 5×108 from 1986 through 2007 and 5×114.3 from 2008 through 2019. The 2008 redesign marks the key change, so neighboring model years can require different wheel families even though both use five lugs. Identify the model year before choosing stock, preparing a quotation, and comparing replacement wheels.
