Jeep Compass Bolt Pattern Guide: Fitment Specifications and B2B Wheel Sourcing

The management of wheel inventory for compact SUVs is initiated by generating awareness of cataloging. Given the change in the bolt pattern from 5×114.3 mm to 5×110 mm on the Jeep Compass, providing incorrect specifications causes the shop installation process to be delayed. Our team helps equip your warehouse with factory-correct alloy wheels that fit well without requiring custom work.

Jeep Compass Bolt Pattern by Generation

The Jeep Compass has made use of two major bolt patterns throughout its production period. The first-generation model MK is known to have a 5×114.3 mm bolt pattern, whereas the second-generation model MP comes with a 5×110 mm bolt pattern.

Close front three-quarter view of a white Jeep Compass with a mounted alloy wheel for a wheel fitment guide

For wheel distributors and automotive retailers, this distinction matters when cataloging replacement wheels. A listing based only on the vehicle name can create confusion because both generations may appear under the same model name.

Model GenerationModel YearsBolt Pattern (PCD)Center Bore
First Generation (MK)2007–20165×114.3 mm67.1 mm
First Generation (MK)2017, depending on versionVerify exact vehicleVerify exact vehicle
Second Generation (MP)2017 onward5×110 mm65.1 mm

The year 2017 is within the span of both generations. Make sure to confirm the body style, market, trim, and the original wheel specifications of your vehicle before you order your wheels. References for fitments will refer to the MK and MP generations individually even when their manufacture years overlap.

The first generation of the Jeep Compass was similar in its platform development history to vehicles like the Jeep Patriot and the Dodge Caliber. The second generation of the Jeep Compass switched to the FCA Small Wide platform. These engineering differences explain why the bolt pattern and center bore changed.

The Jeep Compass Bolt Pattern Explained

The bolt pattern, or pitch circle diameter (PCD), refers to the number of mounting positions and the diameter of the circle that passes through these positions.

So 5×114.3 mm implies that there are five mounting positions and the diameter of the circle is 114.3 mm. The 5×110 mm pattern also has five mounting positions, only that the diameter of the circle in this case is 110 mm.

Illustrated comparison of MK and MP Jeep Compass wheel bolt patterns and center bore checks

Even though the numbers are almost similar, the patterns are different. A wheel that fits a 5×114.3 mm hub does not fit a 5×110 mm hub and vice versa. Do not assume that the wheel will fit because the difference appears small.

First-Generation MK – 5×114.3 mm

The first-generation Jeep Compass was introduced in the mid-2000s and continued through 2017 in some fitment catalogs. Its 5×114.3 mm pattern is also known as 5×4.5 inches.

This pattern is common across many vehicles, giving distributors a broad range of aftermarket wheel options. However, a shared bolt pattern does not automatically make wheels interchangeable between different vehicles. Center bore, offset, width, load rating and brake clearance still need to match the application.

Second-Generation MP – 5×110 mm

The redesigned Compass launched for the 2017 model year on the FCA Small Wide platform. This generation uses a 5×110 mm bolt pattern and a smaller center bore than the earlier MK model.

The difference is especially important when sourcing used wheels or combining inventory for multiple Jeep models. Do not list MK and MP applications together simply because both are Jeep Compass bolt pattern wheels. Use generation-specific fitment information to reduce ordering errors.

Center Bore and Hub-Centric Fitment

The center bore is the opening at the center of the wheel. It fits over the vehicle’s hub and helps position the wheel concentrically.

Fitment references commonly list a 67.1 mm center bore for the first-generation MK and 65.1 mm for the second-generation MP. Verify the specification for the exact vehicle before purchasing wheels or accessories.

When an aftermarket wheel has a larger center bore than the vehicle hub, a correctly sized hub-centric ring may be appropriate. For example, a wheel with a 73.1 mm center bore may require a ring to suit a 67.1 mm or 65.1 mm hub.

The ring must match the wheel and hub dimensions. It cannot correct a mismatched bolt pattern, unsuitable offset or inadequate brake clearance. If a wheel’s center bore is smaller than the hub, it will not fit over the hub without a suitable, approved solution.

For any bulk order of wheels, make sure that the dimensions are double-checked before adding the hub rings. It will prove to be much better than having to provide a universal hub ring based solely on the name of the vehicle.

Wheel Offset and Suspension Clearance

The wheel offset is the measurement of the distance from the mounting surface of the wheel to the center line of the wheel. It influences the position of the wheel in relation to the suspension and fenders.

Positive offset means that the wheel is moved further inward, while a lower offset makes it move outwards. Either change can affect clearance, steering behavior and the position of the tire within the wheel arch.

Don’t assume that all Jeep Compass bolt pattern cars have the same offset ranges. This is dependent on the model year, wheel diameter, wheel width, tire size, and car configuration. There are instances where there are different offset ranges for the MK and MP models.

Before considering the purchase of a wheel, you need to check

  • Wheel width – Confirm that the width suits the intended tire size and vehicle.
  • Inner clearance – Make sure the wheel and tire clear suspension components.
  • Outer clearance – Check for contact with the fender or wheel arch during steering and suspension movement.
  • Brake clearance – Confirm that the wheel clears the brake calipers and other components.
  • Tire dimensions – Match the diameter and width to the fitment requirements of the vehicle.

Even when there is a match in the PCD, it might not fit if it has an incompatible offset or size.

Specifications for Lug Nuts, Lug Bolts and Threads

Even the mounting fasteners differ between the first and second generations of the Compass. First-generation MK versions use wheel studs along with M12x1.5 lug nuts. Second-generation MP versions use wheel bolts along with an M12x1.25 thread specification, although hardware specifications may vary by country.

This is important to note because when offering aftermarket wheels, lug nuts will screw onto studs, whereas wheel bolts go through the wheel and screw into the hub of the vehicle. These cannot be used interchangeably.

Thread diameter alone does not determine compatibility. The appropriate seat design, along with length of thread engagement, must also be accounted for. Using the wrong fasteners may lead to a lack of clamping ability and create a safety risk.

Before shipping a wheel package, verify the vehicle’s original hardware and the aftermarket wheel manufacturer’s requirements. Include the appropriate hardware only when compatibility has been confirmed.

Wheel Sizes for Jeep Compass Applications

Depending on the market and model year, the Jeep Compass may have come equipped with various-sized wheels. Common sizes of factory-installed wheels have included 16, 17, and 18-inch wheels. However, some versions may come with larger wheel sizes or have them available as an option. This means that not all wheel sizes may fit your vehicle.

For replacement and upgrade orders, consider the following

  • 16-inch wheels – This can work well with some configurations, but brake and trim clearance should be considered.
  • 17-inch wheels – This is one of the common configurations in the Compass, and the tire sizes will depend on the configuration.
  • 18-inch wheels – Found on various configurations and used for appearance upgrades.
  • 19-inch and above wheels – Should have their tire size, load capacity, offset, and clearance checked before approval.

You can review available options in the 17-inch alloy wheels and 22-inch alloy wheels categories. Product availability does not by itself confirm fitment for a particular Compass.

Trailhawk and Off-Road Fitment

Trailhawk models and modified Compass vehicles may require additional clearance checks because tire sizes, suspension components and vehicle equipment can differ from standard trims.

A smaller wheel diameter may provide room for a taller tire sidewall, but only if the wheel clears the brakes and the complete wheel-and-tire assembly suits the vehicle. A lower offset can also move the wheel outward, potentially increasing the risk of tire contact with the fender.

For off-road applications, check the wheel’s rated load capacity, construction specifications and suitability for the intended use. Do not rely on finish, spoke appearance or manufacturing method alone to determine whether a wheel can handle the expected loads.

B2B Inventory Checks for Jeep Compass Bolt Pattern Wheels

For distributors, wholesalers and repair networks, the main challenge is keeping fitment records accurate across both generations. A single generic product listing can lead to incorrect orders when customers do not distinguish between the MK and MP platforms.

Use a consistent inventory process

  • Record the generation and model year. Flag 2017 applications for additional verification.
  • Store the core dimensions. Include bolt pattern, center bore, wheel diameter, width and offset.
  • Record mounting hardware. Specify the correct thread, seat type and fastener style for the approved application.
  • Check load and clearance requirements. Confirm that the wheel is suitable for the vehicle and intended use.
  • Keep fitment notes with each SKU. Make important exclusions visible to sales staff and customers.

When considering a wheel for multiple vehicle applications, verify every application independently. A multi-fit design or custom-machined wheel is not automatically compatible with every listed vehicle. The final product must meet the required dimensions and safety specifications.

You can browse the aftermarket car wheels catalog for available wheel options. Confirm the exact fitment with the supplier before committing to a wholesale order.

Final Thoughts

Mastering the Jeep Compass bolt pattern prevents cataloging errors and protects your commercial buyers from fitment claims. Sourcing factory-correct alloy inventory makes sure of clean brake clearance and reliable highway handling. Browse our complete line of aftermarket car wheels to stock your warehouse.

Frequently Asked Questions

01

What is the bolt pattern on a Jeep Compass?

The first-generation MK commonly uses a 5×114.3 mm bolt pattern, while the second-generation MP uses 5×110 mm. The generations overlap in 2017, so verify the exact vehicle version before ordering wheels.

02

Can 5x114.3 mm wheels fit a 5x110 mm Jeep Compass?

03

What is the Jeep Compass center bore?

04

Does the Jeep Compass use lug nuts or lug bolts?

05

What offset is best for aftermarket Jeep Compass wheels?

06

Are Jeep Cherokee wheels compatible with the Jeep Compass?

07

Can I install larger wheels on a Jeep Compass?

08

What should wholesale buyers check before ordering Compass wheels?

Update cookies preferences
Scroll to Top
x
Send Your Inquiry Today
Quick Quote