Kia Stinger Bolt Pattern: Wheel Fitment and Offset Guide

Proper specs on wheel fitment are required for the Kia Stinger to prevent any issues during installation due to an incorrect bolt pattern, offset or brake clearance. This article highlights some of the important dimensions that will be needed when sourcing suitable wheels for your vehicle.

Front three-quarter view of a Kia Stinger with KIPARDO forged wheels and the Wheel Fitment title band

Kia Stinger Bolt Pattern and Factory Specifications

The Kia Stinger bolt pattern size is 5×114.3 mm. This indicates that the wheel has five bolts spaced at a distance of 114.3 mm. Nonetheless, having the right bolt pattern does not guarantee that the wheels will fit.

Other parameters that must be considered include the wheel width, offset, bore size, brake clearance, and the type of fasteners used. Confirm the vehicle’s model year, drivetrain and original wheel package before selecting a replacement.

Wheel specificationKia Stinger details
Bolt pattern5×114.3 mm
Center bore67.1 mm
Thread sizeM12x1.5
GT front wheel19×8 inches, ET34
GT rear wheel19×8.5 inches, ET46.5
GT front tire225/40R19

Specifications for the GT mentioned above pertain to the factory configuration that is applicable to the vehicle. The size of wheels and their specifications may differ depending on the model year and type of trim and market.

The Kia specifications that have been released mention the GT with the staggered 19-inch setup, whereas other versions have a different combination of wheels and tires. The vehicle’s documentation should be consulted before assuming that a specification applies universally. Kia technical specifications provide a useful reference for the listed factory dimensions.

For sourcing teams, the Kia Stinger bolt pattern is a starting point rather than a complete fitment specification. Confirm the remaining measurements before approving a wheel for inventory or customer orders.

Center Bore and Offset of the Kia Stinger

Wheel Center Bore and Hub Fitment

The center bore is the central hole on the wheel that fits around the wheel hub of the vehicle. For the Stinger, it is referred to as 67.1mm.

When the wheel is produced with a larger center bore, there may be a need for the proper hub-centric ring if the wheel producer allows for such assembly. This ring will make sure that the wheel is positioned in the center of the hub. It will not make up for the mismatched bolt pattern and offset or mounting face.

If the wheel with a smaller bore was not machined by the professional, it will hardly fit. Do not try to put it on. Proper contact between the wheel and hub is very important for mounting the wheel correctly.

Wheel offset and positioning

Wheel offset is the distance from the mounting surface of the wheel to its centerline in millimeters. This defines the position of the wheel – whether it is positioned inside or outside.

The mentioned specifications by Kia include ET34 for the front 19×8-inch wheel and ET46.5 for the rear 19×8.5-inch wheel for GT models only. The above values may not necessarily apply to all other trims or wheel sizes of the Stinger.

A different offset changes the wheel’s position relative to the suspension, fender and brake assembly. Too much inward positioning can create clearance issues near suspension components. Excessive outward positioning can increase the risk of fender contact.

When evaluating aftermarket options, compare the proposed wheel’s width and offset with the vehicle’s original specifications. Then verify actual clearance for the specific application. There is no single offset threshold that guarantees fitment across every wheel design.

Factory Wheel Sizes and Staggered Fitment

The Stinger uses different factory wheel configurations depending on its trim and market. Some versions have matching front and rear wheel widths, while GT configurations can use a staggered setup.

Kia’s published 2019 specifications list the following GT wheel and tire combination

Front – 19×8-inch wheel with a 225/40R19 tire.

Rear – 19×8.5-inch wheel with a 255/35R19 tire.

The same specifications list 18×8-inch wheels with 225/45R18 tires for certain configurations. These are factory examples, not a complete list for every production year or regional model.

A staggered fitment involves having different sizes of wheels or tires for both front and rear axles. In selecting replacements for the wheels, it is important that you keep the right dimensions for the axle and not go for alternatives that have not been tested on your car.

Whereas square fitment involves having all four wheels the same in dimension, the fitment cannot be considered as being okay based on similarity in the bolt pattern only. Other factors to consider include brake clearance, wheel width and tire sizing.

For appropriate replacement possibilities, check out 18-inch alloy wheels and 19-inch alloy wheels. Get the specifications of the particular wheel before installing on the Stinger.

Brake Clearance and GT Wheel Selection

Brake clearance is particularly critical for determining wheel fitment for the Stinger GT, which features, according to Kia specifications four-piston front and two-piston rear brake calipers. As indicated by the mentioned GT specification, the brake disc sizes are 350 mm at the front and 340 mm at the rear.

Such brake systems will have a tendency to affect the type of wheels that can be used effectively. The size of the wheel itself does not guarantee proper clearance. The internal dimensions of the wheel, spoke profile and mounting position will all contribute to the clearance of the brakes.

Prior to purchasing a new wheel, make sure that there is sufficient clearance data for that particular wheel and vehicle combination. A wheel that clears one Stinger trim may not clear another.

Appearance is not always an accurate indicator when measuring size. If there are no guarantees from the manufacturer about fitment, request drawings of the fitment or application verification before purchasing wheels.

Brake-Caliper-Clearance-Check

Fasteners, Thread Size and Installation Torque

Commonly available data suggests that fasteners of M12x1.5 are used in Kia Stinger wheels. While this alone does not indicate fastener compatibility, the compatibility of the shape and size of the seat with the wheel must be confirmed.

It must be mentioned that the current nuts may not necessarily suit all replacement wheels. This is because there is a difference in the design of the seats, therefore different wheels need different fasteners. It is recommended to consult with the wheel manufacturer regarding the hardware needed.

According to the Kia owner’s manual, wheel nut torque is supposed to be 79 – 94 lb-ft. Please refer to the manual for your particular model and for additional information regarding specific wheels.

During assembly, make sure that the mounting surfaces are clean and the wheel makes flush contact with the hub. Make sure the fasteners are tightened according to the prescribed torque sequence using a torque wrench. Using the wrong hardware or failing to tighten the fasteners will reduce wheel security.

Wheel Load Rating and AWD Considerations

Every replacement wheel must meet or exceed the applicable load requirements for the vehicle and intended use. Do not apply one universal minimum load rating to every Stinger configuration. Verify the required capacity against the vehicle specifications and the wheel manufacturer’s published rating.

All-wheel drive models must also be fitted with suitable tires. The difference in the size, wear pattern, and rolling radius may influence the performance of the drivetrain. Do not use a universal figure without any documentation for your specific car.

Use tires that are appropriate for the make and drivetrain. If the tire combination is not a stock tire combination, consult a fitment expert to make sure that the tire specifications of the tires are correct for AWD needs.

Such factors become important when supplying complete sets of wheels and tires. The wheel may match the bolt pattern and yet be unacceptable because of its load rating, tire fit or clearance problems.

aftermarket wheels true images from KIPARDO factory

Aftermarket Wheel Selection for the Kia Stinger

The process of sourcing should start with identifying the vehicle. Note the model year, trim, engine, transmission and original wheels. Whenever possible, verify the original specifications by referencing the vehicle’s specifications or a fitment database.

Next, compare the proposed wheel’s PCD, center bore, diameter, width, offset, load rating and brake clearance. Confirm the required fastener type as well. If any specification is missing, ask the supplier for supporting documentation instead of assuming compatibility.

For the distributors and retailers, this procedure helps avoid unnecessary return rates and mistakes in orders. Also, it makes the product listings more effective since customers can differentiate between legitimate applications and simple dimensional matches.

You may also look into aftermarket car wheels to increase your selection. When considering Stinger applications, you should double-check all dimensions and the suitability of the product.

Final Thoughts

However, while the Kia Stinger bolt pattern is a good starting point, there are a number of other factors that need to be considered when trying to get a proper fitment. This includes making sure that all of the vehicle’s specifications of the vehicle are correct.

Frequently Asked Questions

01

What is the Kia Stinger bolt pattern?

The Kia Stinger bolt pattern is 5×114.3 mm. This means five lug holes sit on a 114.3 mm pitch circle. You must also verify the center bore, offset, wheel dimensions and brake clearance before selecting a replacement wheel.

02

What is the Kia Stinger center bore?

03

Does every Kia Stinger use the same wheel size?

04

What are the factory GT wheel dimensions?

05

Can I use the same wheels on all four corners?

06

What is the Kia Stinger wheel fastener thread size?

07

What is the wheel-nut torque specification?

08

Do Stinger GT wheels need special brake-clearance checks?

Update cookies preferences
Scroll to Top
x
Send Your Inquiry Today
Quick Quote